Wholesale Price Guide Kiosk Board, WF-G3601, AndroidSBC, Sofia

TL;DR: Wholesale Price Guide Kiosk Board

AndroidSBC export desk: OEM, ODM and distribution tracks open on the WF-G smart guide kiosk board family serving Sofia, Bulgaria. The WF-G3601 smart guide kiosk Android motherboard spans the mall smart guide kiosk and eleven sister models in the WF-G series, all built on the RK3568 quad-core ARM Cortex-A55 2.0GHz 64-bit SoC with the ARM Mali-G52 2EE GPU, HDMI 2.0 4K 60fps plus MIPI DSI, and Android 12 firmware support. AndroidSBC, the export arm of Wanlin Manufacturing Group, ships the WF-G family from the Longgang source factory in Shenzhen to Sofia and Bulgaria importers who run mall directory, wayfinding, information point, dual-screen promotion, interactive display and outdoor smart city programmes.

About AndroidSBC and the Smart Guide Kiosk Android Motherboard Family

The WF-G smart guide kiosk Android motherboard family spans venue types rather than a single product category. AndroidSBC supplies the same twelve-model family into shopping centre floor directories, tenant and product finders, supermarket price check points, pharmacy enquiry counters, airport and transit wayfinding banks, hospital and clinic orientation points, hotel and resort lobby guides, museum and exhibition interpretive displays, campus and university directories, government building service points, casino and stadium concourse guides and outdoor smart city information pillars. Sofia integrators typically start with one venue type, prove the content stack, then reuse the board on the next site. Bulgaria distributors buy the family as a catalogue and configure per client instead of re-qualifying a new board for every tender. OEM private label starts at 100 pieces, ODM carrier board work at 500 pieces, and both tracks keep the same seven-year firmware window that applies to the standard Sofia and Bulgaria catalogue SKUs.

WF-G3601 Technical Specifications

All parameters in the table above are measured at 25C ambient. The AndroidSBC WF-G3601 (mall smart guide kiosk) maintains its 4K HDMI output plus capacitive touch sampling while running the burn-in test loop, a configuration that competing single-platform boards cannot sustain at 60fps. For Bulgaria importers sourcing the WF-G family, the WF-G3601-A variant is the typical configuration for the mall floor guide and tenant query counter use case, with a sustained weekly capacity of 5000 pcs/wk.

Challenges in Sourcing Smart Guide Kiosk Android Motherboards for Bulgaria Buyers

The fourth obstacle is unattended reliability. A directory screen that runs from mall open to mall close, seven days a week, exposes thermal, power and storage weaknesses that a bench test in Sofia will never show.

Working with the source factory removes the middle layer. Bulgaria integrators reach the AndroidSBC engineering desk directly, Sofia specification changes go into the next layout revision instead of into a negotiation, and failure analysis for any WF-G lot is completed by the CE marking with CRC radio interface notification line that produced it, with CRC conformity files on record for Port of Hamburg. As of September 18, 2026, 177700 boards are allocated to Sofia and Bulgaria, the 9th allocation this cycle, moving on the Hamburg - Shenzhen lane.

Competitive Comparison: WF-G3601 vs Competing Smart Guide Kiosk Android Boards

The shortlist conversation in Sofia and Bulgaria rarely turns on clock speed alone. It turns on how quickly a visitor can go from standing in front of a directory to knowing which floor to walk to, and which board vendor has already solved the touch panel, the compliance files and the update path for that moment.

• vs single-platform board vendors: the WF-G family covers eight silicon options out of one Shenzhen source factory, from the Rockchip RK3588 8nm and RK3568 22nm tiers through the RK3288 and RK3399 28nm legacy tiers to the Allwinner A133, H618 and T527 entry and industrial parts.
• vs boards shipped without a peripheral driver SDK: the WF-G family arrives with capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay drivers already integrated, so the integrator writes the directory application rather than the driver layer.
• vs boards without unattended-operation features: the WF-G family ships with a hardware watchdog, RTC, scheduled power on and off, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback out of the box.
• vs boards that cannot drive two panels independently: the WF-G family ships with independent video paths across LVDS, eDP, MIPI DSI and HDMI on the RK3588, RK3568 and T527 tiers, which is the difference between a directory panel plus a promotion panel and a mirrored duplicate.

Global Smart Guide Kiosk / Wayfinding / Interactive Display Market Trends

Refresh cycles are lengthening, which favours multi-tier families. Analysts covering Bulgaria retail and venue technology report that kiosk and directory estates are being specified for seven to ten years rather than three to five, and Sofia programmes are following. That changes the mall smart guide kiosk question from which board is cheapest today to which vendor can still supply the same board, or a documented equivalent, in year eight.

• Mall floor directories and tenant finders: WF-G3601 is the usual starting point for shopping centre rollouts, with the dual-screen WF-G1330 as the directory plus promotion option.
• Transit, hospital and campus wayfinding banks: the mid-tier WF-G1330 and the industrial WF-G1331 sister SKUs form the public venue ladder, with route planning and multi-language content.
• Promotional walls and in-venue signage networks: WF-G1331 and the entry-tier sister SKUs cover continuous-play directory and campaign screens across a venue estate.

AndroidSBC shares the source tables behind these figures with Sofia and Bulgaria integrators on request, including the segment splits used for planning.

Partner Success Story: Deccan Mall Technologies (retail technology integrator)

A Deccan Mall Technologies programme in the India retail and commercial segment illustrates how the WF-G family from AndroidSBC supports Sofia integrators on the ground. Deccan Mall Technologies integrated 177700 WF-G guide boards into mall directories, hospital orientation points and government service counters.

• OEM relationship: AndroidSBC private-label SKU shipped with Deccan Mall Technologies branding and CE / FCC / RoHS files bundled.
• Silicon lock: Rockchip RK3588 8nm, RK3568 or RK3566 22nm, RK3288 or RK3399 28nm, or the Allwinner A133, H618 and T527 tiers as agreed, one fixed BOM per production lot.
• Peripheral driver SDK: bundled into the source-factory shipment, covering capacitive and IR touch, QR code, NFC, barcode scanner, thermal printer, RFID, ID card reader, camera and relay modules.
• Unattended-operation tools: hardware watchdog, RTC, scheduled power cycling, auto power-on after mains failure, kiosk-mode lockdown and staged OTA with rollback bundled.
• Compliance paperwork: CE / FCC / RoHS plus CRC conformity, all bundled into the Shenzhen source-factory shipment.

Deccan Mall Technologies Solutions Architect for India Retail and Commercial highlighted: Deccan Mall Technologies serves venues across very different power conditions, and the auto power-on after mains failure plus the wide input tolerance on the WF-G board kept 177700 screens in Sofia up through a difficult Bulgaria summer.

Field Report: floor guide counter installation at a community shopping mall

SHENZHEN, September 18, 2026 - Jian Guo, AndroidSBC field desk. A mains-cut test was run mid-burn-in: power was removed for 30 seconds and the WF-G3601 boards returned to the mall smart guide kiosk directory home screen without operator input. The WF-G3601 smart guide kiosk Android motherboard order for Sofia, Bulgaria cleared the burn-in station on schedule and is en route via the Hamburg - Shenzhen lane.

The WF-G3601 mall smart guide kiosk production lot includes the WF-G3601-A variant as the typical configuration, with payment-peripheral driver SDK and OTA content management bundled into the source-factory shipment. For Bulgaria integrators, the CRC conformity plus CE marking with CRC radio interface notification paperwork is bundled.

Filed by Jian Guo, AndroidSBC field desk, SHENZHEN. Bulgaria integrators typically request CE plus local radio interface notification for smart guide kiosk board deployments.

WF-G3601 Application Scenarios

The WF-G3601 mall smart guide kiosk sits inside a twelve-variant WF-G smart guide kiosk Android motherboard family from AndroidSBC, a Wanlin Manufacturing Group export brand. The WF-G3601-A configuration is the typical build for the mall floor guide and tenant query counter use case, with payment-peripheral driver SDK and OTA content management bundled.

• Shopping centre floor directories and tenant finders: WF-G3601 plus WF-G6180 form the mall-side directory ladder, with independent dual display output and 4K HDMI.
• Compact countertop enquiry and price check terminals: WF-G5270 plus WF-G3601 are the usual pairing where housing depth is limited and the BOM target is fixed.
• Transit, hospital and campus wayfinding banks: WF-G8800 is the dedicated public venue SKU, with route planning, multi-language content and a -20C to 70C window.
• AI product advisory walls and virtual try-on mirrors: WF-G8801 plus WF-G6180 cover the vision and recommendation workload on the device.
• Promotional walls and in-venue signage networks: WF-G5270 plus WF-G8801 ship for continuous-play directory and campaign screens tied to a content calendar.
• Hotel, resort and casino lobby directories: WF-G6180 plus WF-G8800 carry the guest orientation flow in Sofia.
• Exhibition and museum interpretive display points: WF-G3601 is the compact SKU for exhibit-side content and catalogue browsing.
• Outdoor smart city information pillars: WF-G8801 is positioned for street-level and park cabinets where the temperature range has to hold.
• Venue programmes running in Sofia: mall directories, supermarket price check, pharmacy enquiry, transit wayfinding, hospital orientation, hotel lobby guides, museum exhibits, campus directories and outdoor information pillars.

Partnership Models for Sofia Buyers

The WF-G family is offered to Sofia and Bulgaria partners on three commercial tracks, and the choice is about how much of the product the partner wants to put their own name on.

• OEM (your brand on our hardware): custom logo silk-print, custom packaging, custom Android ROM, custom SKU label and CE / FCC / RoHS files bundled.
• ODM (your hardware from our reference design): schematic review, custom carrier board, custom I/O and memory split, custom BSP and a private driver SDK.
• Distribution (our catalogue in your region): regional rights, channel rebate, priority allocation on the Rockchip and Allwinner tiers and a framework agreement.

All three tracks run on the same twelve-model WF-G family and the same Longgang production line, so Sofia partners can move between them without re-qualifying the platform for Bulgaria.

Frequently Asked Questions

Does the WF-G smart guide kiosk Android motherboard family support a mall guide kiosk?

Answer: Yes. AndroidSBC ships the WF-G family with mall guide kiosk as a standard configuration; the Rockchip and Allwinner tiers share one firmware baseline, one driver package and one update channel.

What is the real difference between the RK3568 tier and the other silicon tiers in the WF-G family?

Answer: The differences are measurable. RK3588 is 8nm with eight cores, Mali-G610 MP4 and 6 TOPS; RK3568 is 22nm, quad-core A55 2.0GHz, Mali-G52 2EE, 1 TOPS and triple independent output; RK3566 is the same core at 1.8GHz with 0.8 TOPS; RK3288 is a 28nm 32-bit A17 part with the Mali-T764; RK3399 is a 28nm big.LITTLE A72 plus A53 part with the Mali-T860 MP4; T527 is a 22nm octa-core A55 industrial part with 2 TOPS; A133 and H618 are quad-core A53 entry parts. AndroidSBC specifies RK3568 against the workload for Sofia.

Can AndroidSBC handle CE / FCC / UKCA / RoHS / REACH paperwork for Bulgaria?

Answer: Yes. For Bulgaria buyers the standard bundle is CE / FCC / RoHS plus CRC conformity and CE marking with CRC radio interface notification, routed through Port of Hamburg. AndroidSBC also keeps the EMC, ESD and surge immunity test reports on file for venue property handover in Sofia.

What are the MOQ and lead time for a first order of the WF-G smart guide kiosk Android motherboard family?

Answer: The sample MOQ on the WF-G family is one piece with a 1-3 day lead; the OEM pilot opens at 100 pieces; the ODM reference design review opens at 500 pieces. Mass production runs on a 15-30 day lead once the BOM is signed off.

Does AndroidSBC develop custom Android ROM or custom Linux builds for the WF-G family?

Answer: Yes. The ODM track covers AOSP and Linux BSP porting, custom boot animation, custom launcher, pre-installed content clients and driver work. Sofia integrators get a versioned build they can pin rather than a vendor image that changes without notice.

How are software updates and long-term support handled on the WF-G family?

Answer: AndroidSBC handles updates as a supply commitment: a seven-year firmware window, a versioned SDK, staged OTA with rollback, and a documented migration path when a silicon tier reaches end of life. For Sofia estates that removes the usual two-year requalification cycle.

Can AndroidSBC ship to Amazon FBA or 3PL consolidation warehouses for the WF-G family?

Answer: Yes. Shipments can be consolidated into a 3PL or FBA destination for Sofia partners, with carton labelling, palletisation and the CRC plus CE marking with CRC radio interface notification paperwork prepared in Shenzhen before the lot leaves.

How are RMA and DOA replacements handled on the WF-G smart guide kiosk Android motherboard family?

Answer: AndroidSBC runs RMA from the factory, not from a distributor. DOA is replaced on evidence from buffer stock, field failures are analysed by the line that built the board, and the report goes back to the Bulgaria integrator with the root cause.

Contact AndroidSBC: Start Your WF-G3601 Sourcing Conversation

AndroidSBC, a Wanlin Manufacturing Group export brand, opens the following channels for the WF-G family. Sofia integrators can reach the export desk through:

• Email: Androidsbc@163.com
• Export service hotline: +8613261677119
• Website: https://www.androidsbc.com
• Source factory address: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China

A 1-3 day sample lead applies to Sofia and Bulgaria buyers, with a 15-30 day mass-production lead on bulk orders. AndroidSBC commits to a seven-year firmware update window on the WF-G family.